Home
[rev_slider_vc alias=”test-slider”]
Professional Headlight Lens Restoration
Headlights deteriorate for a combination of reasons. Chief among those reasons is UV ray deterioration. UV ray deterioration can leave headlight lenses with either a milky-white “scratched” appearance or a yellow “film” layer. Both forms of deterioration can reduce the light output of a headlight by more than 75%, which effects safety, visibility & appearance, and resale value.
Developed by a body work professional with over thirty years experience, Headlight Renew Doctor is a true 15 minute headlight restoration kit that is easy to use and will last 3-5 years!
Headlight Renew Doctor utilizes a proprietary, patent-pending “spray-on” UV protective sealant that includes both anti-UV ray and anti-yellowing agents, as well as special sealing components designed to deliver the ultimate in protection for headlight renewal.
Headlight Renew Doctor has restored over 100,000 sets of headlights to date and is the only product on the market to address both deterioration issues for product longevity! Plus, with its 5+ years of existence, Headlight Renew Doctor, to-date, still has 100% customer satisfaction!
Try HeadlightRenewDoctor for 30 days, if you do not like the product, return unused product for full 100% money back guarantee!
HeadlightRenewDoctor….because it works!
15-Minute Headlight Restoration System
[ultimate_spacer height=”20″]
Step-by-Step Walkthrough
Step 1
With the 6” paper and tape, cover-up all around the headlight area. Tape down the edges of paper so the wind cannot blow paper around. Apply 2 layers of tape around edge of headlight for added protection.
Step 2
First take the sanding block, sanding the entire surface of the headlight. Some headlights will just have a “yellow layer,” others will have a “cloudy layer.” Both have to be completely sanded-off in this sanding process.
Step 3
Then take a sheet of 600 grit sandpaper water-sanding the entire headlight surface smooth until the “balling-up” on sandpaper no longer appears.
Step 4
Then take a sheet of 1000 grit sand-paper wet-sanding entire headlight smooth. The more you sand with 600 and 1000 grits, the better the end-results will produce!
Step 5
Then take the white rag and clean the entire headlight surface of dust, lightly wipe-off the dust on the headlight surface. Wipe and clean entire surface!
Step 6
Next take the “Headlight Renew” spray can from your box and shake for 3-4 minutes.
Step 7
Using the spray can, spray an even “semi-gloss-coat” over entire headlight surface using sweeping left to right motion. Allow 1st coat to dry approx. 2-3 minutes.* Then apply a second gloss-coat coat evenly over entire surface. Refer to website video for applying UV Ray protective Sealant process! (You may want to practice spraying a small amount on a board before applying Sealant to the headlight.)
Step 8
If a “cloudiness” appears in spray, use a hairdryer or a heatgun and apply hot-air on headlight for 30 seconds and “cloudiness” will disappear!
Step 9
Proceed to 2nd headlight and repeat process beginning with Step # 1. Allow both headlights to let dry for about 5 minutes, and then remove all tape and paper carefully from your automobile using caution not to touch headlights. For best results: 1st coat is semi-gloss coat, 2nd coat is the gloss-coat!
[ultimate_spacer height=”20″]
Video Demonstration
[ultimate_spacer height=”20″]
Testimonial Video
Purchase Online or Visit Our Partners
[us_single_image image=”119″ size=”full” align=”center”]
[us_single_image image=”112″ size=”full” align=”center”]
[us_single_image image=”120″ size=”full” align=”center”]